Introduction
This guide explains how to remove the main brush motor from your Roomba.
Ce dont vous avez besoin
-
-
-
Push on the dirt bin release button, and pull gently.
-
-
-
Use a Phillips #1 screwdriver to loosen the 4 captive screws around the case .
-
-
-
Use a Phillips #1 screwdriver to remove the 9.5mm screws from the side of the brush case, and pull to detach.
-
Repeat for the opposite side of the brush case.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Annulation : je n'ai pas terminé ce tutoriel.
2 autres ont terminé cette réparation.