Aller au contenu principal

Repair information for the 6th generation iPod nano. Released in September of 2010. Model Number: A1366.

174 questions Voir tout
Question close

iPod screen with no glare

I replaced the iPod screen usually are put enchergo oq have it if I'm in a very good luminado, and I still have trouble seeing, she is dull, already increased the brightness at maximum, however the ipod does not change anything. what do you? Thanks

Répondu ! Afficher la réponse J'ai le même problème

Cette question est-elle utile ?

Indice 0
Ajouter un commentaire

1 Réponse

Solution retenue

cassiolutk, if your screen is still dark, and only visible when illuminated from an outside source, it is your backlight. It is possible that you have a bad LCD, even so you just replaced it. Check the connector on the circuit board for corrosion. Check inside the connector. Clean the circuit board thouroughly with isopropyl alcohol. If that does not resolve it, the backlight circuit on your logic board has failed. You could check for a bad backlight coil/IC or replace the board. Hope this helps, good luck.

Cette réponse est-elle utile ?

Indice 1
Ajouter un commentaire
Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 0

Total : 714