Aller au contenu principal

Repair information and troubleshooting for Craftsman-brand riding lawnmowers.

546 questions Voir tout

Mower starts but won't move.

Mower turns on but will go neither forward nor backward. Just had it serviced at 25 hours last week. The pull knob for pushing the mower is not engaged. It is in position for the mower to be self propelling.

Répondu ! Afficher la réponse J'ai le même problème

Cette question est-elle utile ?

Indice 1
Ajouter un commentaire

2 Réponses

Solution retenue

check and see if the “axle key” are still in

Cette réponse est-elle utile ?

Indice 0

1 commentaire:

check to see if brake peda isl released

par

Ajouter un commentaire

There is a vacuum hose going from the front to back on the YV 4000 Craftsman . It rides above one of the pulleys on the deck (left side) and the hose can be cut into by the pulley. You might replace the hose (or tape it up) then use a wire tie (not too tight) or something to hold the hose up.

Cette réponse est-elle utile ?

Indice 0
Ajouter un commentaire

Ajouter une réponse

Allison sera éternellement reconnaissant.
Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 0

Total : 1,903