Réparez vos affaires Communauté Boutique

Third generation of iPad with Wi-Fi, released on March 16, 2012. Model Number A1416. Repair requires heating and careful prying.

154 questions Voir tout

Options

iPad Digitizer Replacement and Repair Problem

Hello

I am repairing an iPad 3 digitizer.

After removing the broken digitizer, I was testing the new parts and all was well at that time.

Don't ask me how, but I almost dropped the unit during this testing phase. No adhesive was applied, and it basically fell into the three pieces while turned on.

The LCD display cable came unplugged while the unit was powered on.

At this point, the device does not display anything at all now.

How do I determine if it is the display or the logic board that has failed?

Répondre à cette question J'ai le même problème

Cette question est-elle utile ?

Oui Non
Indice -1
Ajouter un commentaire

1 Réponse

Filtrer par :
Les plus utiles Les plus récentes Les plus ancien(ne)s
Réponse la plus utile

Options

Hey Vince,

After you plug or unplug the LCD while your iPAd is on you need to perform hard reset by holding power and home button down until you see apple logo appear on the screen.

Of course this will only work if you did not damage any of the flex cables or connectors.

Hope this will help.

Cette réponse est-elle utile ?

Oui Non
Indice 2

1 commentaire:

John

I had tried the hard reset first, but after reading your post, I went back and tried it once more.

The device powered on and is functioning.

Kudos.

par

Ajouter un commentaire

Ajouter une réponse

Vince sera éternellement reconnaissant.
Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 0

Total : 3,557