Aller au contenu principal

4ème génération de l'Apple iPhone. La réparation est relativement simple, mais la vitre avant et le LCD doivent être remplacés ensemble. GSM / capacité de 8, 16 ou 32 Go / Modèle A1332 / noir et blanc.

2375 questions Voir tout

What could possibly cause my sound problems after reassembling?

Hi all,

I have the following problem:

I changed the proximity sensor/power button flex cable in my iPhone 4 GSM device and reassembled it. The power button works, but some additional problems came up...

- When talking to others on the phone, they are extremely quiet (tested with different partners).

- When talking on speaker phone, they cannot hear me.

EVERYTHING else works fine (did a long extensive testing).

I noticed that the piece marked with the red arrow on the uploaded picture is damaged. It broke at around the red line. It has not come off, but it is definitely not in original state.

http://imageshack.us/scaled/landing/826/...

What does that piece do? Could that cause my problems? What else could have gone wrong?

Thanks in advance!

Répondu ! Afficher la réponse J'ai le même problème

Cette question est-elle utile ?

Indice -1
Ajouter un commentaire

1 Réponse

Solution retenue

Kenzo, I think for your earpiece there are no need to change it, just adjust your earpiece proprely.

But for the mic, I think the problem comes from the flex you replaced, you have to change it. Maybe the new flex is not good.

Cette réponse est-elle utile ?

Indice 0

2 commentaires:

Thanks for the information, I will try to replace it sometime.

Which part of the flex cable is reponsible for the speaker mic?

Btw, you were right about the earpiece ... it now works. Thanks again.

par

The mic on the flex is the gold color part.

par

Ajouter un commentaire

Ajouter une réponse

Kenzo sera éternellement reconnaissant.
Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 0

Total : 498