Aller au contenu principal

Deuxième génération de l'iPhone. Modèle A1241 / capacité de 8 ou 16 Go / coque arrière noire ou blanche. La réparation est plus simple que pour l'iPhone de première génération et nécessite des tournevis, des outils pour faire levier et une ventouse.

1158 questions Voir tout
Question close

iPhone keep restarting after disassemble

Hi,

I had a question recently due to i need to change my side volume adjustment so i disassemble & after i assemble back my phone start up with apple logo. abt 3 to 5 mins it came out the running cycle behind the logo awhile it restart again.

i had restore with itune was sucess but after a while it repeat again of restarting.

i also did disassemble another iPhone due to changing of battery & assemble back & it same thing happen as above mention,

Is there something wrong with my assemble or is it hardware problem/some parts broken/some parts i did not install properly.

Please help.

Rgds

Répondre à cette question J'ai le même problème

Cette question est-elle utile ?

Indice 0
Ajouter un commentaire

1 Réponse

I would make sure all of the connections are properly seated. It sounds like the logic board is faulty, but it is unlikely that two logic boards were damaged in this same way, which makes me think something is not connected properly.

Cette réponse est-elle utile ?

Indice 0
Ajouter un commentaire
Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 0

Total : 1,882