Rep: 997
7
4
2
sorry!
my friend give to me an old powermac g5 for big problem.
after mac os start, the temperature is about 90° and once it reaches 100° goes in protection.
i see no fluid loss, but i think the problem is with cooling.
any idea? thanks
this is solution? http://www.saunalahti.fi/~holindho/g5-qu...
really thanks
Cette question est-elle utile ?
Rep: 685,3k
3,4k
1,1k
2,6k
Run your Apple Hardware Test (AHT) from the original system installation disk. Hold down the "D" key on start up with the disk installed and see if its the coolant or possibly one or more of the fans.
Cette réponse est-elle utile ?
i will try, but all fans are going fast...
thanks for support
finally find asd but now the g5 won't start :(
his make fan check, and monitor don't show nothing :(
no moore idea?
really thanks
Dernières 24 heures : 0
7 derniers jours : 0
30 derniers jours : 1
Total : 357
2 commentaires
Is that 90 degrees F or C
par mayer
is celsius degrees :(
probably i have to change water pump and get new liquid! it is not easy but I groped with the link step.
if I succeed, I will proceed with the calibration fan with ASD Dual Boot 2.5.8
par lapo