Aller au contenu principal

Model A1312 / Mid 2010 / 3.2 GHz Core i3 or 2.8 & 3.6 GHz Core i5 or 2.93 GHz Core i7, ID iMac11,3

382 questions Voir tout

Replacing the video synchronisation cable

Hello,

Unfortunatly while tearing down my new iMac (to change the Internal HardDrive) something went wrong (%&#* clumsiness lol) and the 4 pin synchronisation video cable was scratched (which link the 27" screen and the board to left of the alimentation unit).

Does anyone know where I can find some replacement cable ? I've looked everywhere unsuccessfully :-(

Thanks a lot for any response !

Répondu ! Afficher la réponse J'ai le même problème

Cette question est-elle utile ?

Indice 1
1 commentaire

Thanks for your response.. i've looked on the apple site and call a tech center. Unfortunatly degradations due to bad manutention break the warranty as i supposed :-(

I've managed to "fix" the cable but a new one would not be luxury lol

Here again, any clue would be very helpfull, thanks !

par

Ajouter un commentaire

4 Réponses

Solution retenue

This machine was still under warranty. Parts will be very hard to find as it is so new. It might still be covered if it was in the original condition.

Cette réponse est-elle utile ?

Indice 2
Ajouter un commentaire

Apple's part number for the VSYNC cable for this model is 922-9161, hope this helps.

Chris

Cette réponse est-elle utile ?

Indice 2
Ajouter un commentaire

I "googled" it but no relevant result :-( I'll keep the part N° however and thanks for the intell ;-)

Cette réponse est-elle utile ?

Indice 1
Ajouter un commentaire

Applecomponents 64NE FARRAGUT ST. PORTLAND OR. 97211-2206 . I purchased this cable from them.Best of luck!

Cette réponse est-elle utile ?

Indice 0
Ajouter un commentaire

Ajouter une réponse

fpeliss sera éternellement reconnaissant.
Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 1

Total : 2,122