Aller au contenu principal

Version revisitée de l'iPhone 3G avec une vitesse de traitement plus élevée. La réparation de ce modèle est similaire à celle du 3G et nécessite de simples tournevis et outils pour faire levier. Modèle A1303 / capacité de 16 ou 32 Go / coque en plastique noir ou blanc.

1500 questions Voir tout
Question close

iPhone not working, screen tabs broken and it doesnt come on

I replaced the battery which seemed to work but then the tabs 1 and 2 fell off that were attached to the screen. So we used metal tape and electrical tape to try and put them back because soldering wasn't sticking. now it doesnt turn on and tab number 7 wont stay down! The main machine seems to work tho, it starting making the same sound as when I received emails but the screen doesn't work, Is this junk or can I fix it?

Répondu ! Afficher la réponse J'ai le même problème

Cette question est-elle utile ?

Indice 0
Ajouter un commentaire

1 Réponse

Solution retenue

Meghan Locke, when you say " tabs 1 and 2 fell off" I suppose you mean connector 1 and 2, #1 is for the LCD and #2 is for the touch screen. #7 is for the antenna. Now when you say you tried to solder but it would not stick, I assume you are talking about soldering the connector back to the logic board. Unless you have the right tools and the experience, this is a very difficult task. Sticking it on the board with tape is not going to accomplish this. It will not make any contact with the board. I strongly suggest that you find somebody locally who is equipped to solder those connectors back on the board. Hope this helps, good luck.

Cette réponse est-elle utile ?

Indice 3

2 commentaires:

Thanks, Its usually very expensive tho so I was trying to figure something out, but I realize now that I need to get it professionally done, thanks for your help

par

Best of luck to you...

par

Ajouter un commentaire
Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 0

Total : 159