The iPhone gets above water, is do work well everywhere but the microphone does not.
Changed the Mic and 'still does not work.
I wonder if it may be damaged the motherboard or is there any solution
:)
Cette question est-elle utile ?
Rep: 116,3k
66
68
359
Yes when you put a powered logic board in water it will get damaged. Especially if you put power to it before it's had adequate time (days not minutes or hours) to dry.
You can use the tags at the left to find a guide and advice about troubleshooting your problem, but if you've replaced the microphone a damaged connector or component on the logic board is the next most likely cause to your problem. Logic board component repair IS NOT A DIY PROJECT. . . however complete replacement of the logic board is.
Good Luck,
If this answer is acceptable please remember to return and mark it.
Cette réponse est-elle utile ?
Dernières 24 heures : 0
7 derniers jours : 0
30 derniers jours : 0
Total : 2,234
