Laptop won't power up

Hello, I replaced a lcd screen in a early 2011 MBP and when I try to turn it on, nothing happens. I have tried all the normal things such as disconnecting the battery, making sure my cords are properly seated, etc, the battery had most of a full charge, when I press the battery status button, it lights up to show me how much battery there is and when I plug in the power cord, the light on it comes on as well. I have also tried to reset the PRAM/NVRAM and I had no luck. I also followed the instructions to reset the SMC, when I did that, the light on the magsafe connector did change, almost acknowldeged that something happened but that still didn't fix the problem, just nothing at all happens when I press the power button, is there anything at else I can try?

Une réponse ! View the answer J'ai le même problème

Cette question est-elle utile ?

Score 0
Ajouter un commentaire
Répandez la magie de Noël
Obtenez 12 $ de réduction sur les commandes de 50 $ ou plus avec le code FIXMAS12
Répandez la magie de Noël
Obtenez 12 $ de réduction sur les commandes de 50 $ ou plus avec le code FIXMAS12

1 réponse

Solution retenue

Hello,

you have fully recovered the keyboard cable?? because it is not always easy to insert to the end ...

Cette réponse est utile ?

Score 2

Commentaires:

I agree with Eldoctor62. If you get no activity when pushing the power button then check the top case ribbon cable connection the logic board.

par

Ajouter un commentaire

Ajoutez une réponse

bigjkcfan sera éternellement reconnaissant.
Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 0

Total : 334