Aller au contenu principal
Question close

I replaced digitizer and fram now home button not work. why?

My glass broke and went on youtube and then bought new digitizer , got it then realized i needed plastic fram so bought it and took apart and put back together and it turns on but won't go home. the home button doesn't work. did i forget a part. looked on work area and found a little plastic piece that looks like it might go under the button but not sure. is there a site to see a parts diagram?

thanks

mark

Répondre à cette question J'ai le même problème

Cette question est-elle utile ?

Indice 0

Commentaires:

I noticed you never got an answer to this. Are you still having this problem?

par

Ajouter un commentaire

2 solutions

This happened to me. My problem was a rubber piece that fell off the digitizer assembly after I installed it. This created resistance. To get my home button to work requires holding in the left lower corner then pressing home.

Cette réponse a-t-elle été utile ?

Indice 0
Ajouter un commentaire

look at the home bouton connector

Cette réponse a-t-elle été utile ?

Indice 0
Ajouter un commentaire
Afficher les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 0

Total : 2,758