The glass is held down by a ring of adhesive around the perimeter. Heat it with a hair dryer to soften. Most tool kits that come with the replacement digitizers have a few guitar pics in them to use to pry it away from the frame.
After removing the large number of #00 phillips screws...
unplug the old digitizer cable & IC chip.
Desolder the IC chip assembly and Home flex cable.
Solder IC Chip assembly and Home flex to new digitizers cable.
that's it in a nutshell.
BUT getting the points juuuuuust right is tedious to say the least.
M.D. PC Sales and Services
Cette réponse est-elle utile ?