Aller au contenu principal

4ème génération de l'Apple iPhone. La réparation est relativement simple, mais la vitre avant et le LCD doivent être remplacés ensemble. GSM / capacité de 8, 16 ou 32 Go / Modèle A1332 / noir et blanc.

2375 questions Voir tout

Booting loop after replacing power and sensor cable

I just replaced the power and sensor cable of my iPhone. Unfortunately it won't power on any more after the replacement. I can't turn it on via power button but if i connect it to my Ma, i will go on and display the apple logo on the screen. After a few seconds the logo disappears and it powers off. Then it starts right at the beginning (Power on, Apple logo, power off, ...). I'm suspecting a booting loop, but I have no idea how to fix it. Is there a possibility that the replacement power and sensor cable I bought doesn't work correctly? That would explain the not working power button. Any help?

Répondu ! Afficher la réponse J'ai le même problème

Cette question est-elle utile ?

Indice -1
Ajouter un commentaire

1 Réponse

Solution retenue

The first thing I would check is the Battery and Battery connector. Make sure the battery connector is undamaged and make sure the screw under the battery connector is tight and in all the way so the battery connector can fit down all the way and snug.

Also, check the button itself and make sure it clicks normally and isn't screwed in too tight. A lot of the time the aftermarket button will need "tuned" a little bit to make sure it clicks properly and isn't just pressed all the time because of the tension put on it by the screws.

Hope this helps!

Cette réponse est-elle utile ?

Indice 0

2 commentaires:

Thank you for the quick response!

Just tried reconnecting the battery connection - seems fine to me. But the phone is still not responding to my commands.

Maybe I should also mention that itunes doesn't recognize my phone when I connect it to my Mac.

The button clicks perfectly. Nevertheless I will try to loosen the two screws a little bit. I will let you know if that worked for me.

par

Thank you so much, my phone is working again! It was the battery connector.

par

Ajouter un commentaire

Ajouter une réponse

martinhumnig sera éternellement reconnaissant.
Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 0

Total : 817