Aller au contenu principal

6ème génération de l'Apple iPhone, annoncé le 12 septembre 2012. La réparation de cet appareil est similaire aux précédents modèles et nécessite des tournevis et des outils pour ouvrir et faire levier. Disponible en GSM ou CDMA / 16, 32 ou 64Go / Noir ou Blanc.

2522 questions Voir tout
Question close

Poor signal after screen replacement

A friend has taken a phone to have the screen replaced.

After the repair the phone has very poor signal. I've done a soft reset/ hard reset. I then checked and the antenna is correctly attached and the bars in the right place.

I know on older models the short is something to motherboard. Can this affect the 5 too.

Anyone found any fixes?

Répondre à cette question J'ai le même problème

Cette question est-elle utile ?

Indice 0
Ajouter un commentaire

4 Réponses

Réponse la plus utile

Did you all disconnect the battery terminal when you done this repair?

Cette réponse est-elle utile ?

Indice 1

6 commentaires:

Richard how can it be for a different model?

par

Some of the models of 5 and 5s even 5c have different screens i have noticed some are a little bit thicker and it can cause a huge draw on the battery I heard of this problem before and they claimed it was because the screen that was replaced was thinner than the one they received. Because of the different companies that make the screen

par

But you couldn't even connect a 5c or 5s screen to a iPhone 5 cause the connector is the opposite way around

par

Maybe the different companies that make them I am unsure of the validity of the info I had received but it made perfect sense if a company cheaply makes a iPhone 5 screen it could take more power thus increasing the heat and lowing the signal because it doesn't have the power to operate at full strength. That is why I asked for feedback to see if their is truth to their claim. My personal experience with them I haven't had this issue but I have heard a lot about it.

par

Makes sense I wonder did these boys disconnect the battery if so they could have knocked off componants around it..

par

Afficher 1 commentaire en plus

Ajouter un commentaire

Same issue as mine!! Looking foward to find a solution! :(

Cette réponse est-elle utile ?

Indice 0
Ajouter un commentaire

I'm having the exact same problem. Just replaced my screen, and now I have very little signal and the phone's battery drains really fast and the phone gets hot. All I did was replace the screen, and this isn't the first screen I've replaced. It didn't do this before on the other phone on which I replaced the screen.

Cette réponse est-elle utile ?

Indice 0
Ajouter un commentaire

Check connections it may be heating up because of a poor connection also double check the screen if possible if its for a different model iPod it will have a huge draw for the power making the signal weak. Let me know if this helps please.

Cette réponse est-elle utile ?

Indice 0
Ajouter un commentaire
Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 0

Total : 1,631