Model A1224 / Mid 2007 and Early 2008 / 2, 2.4, or 2.66 GHz Core 2 Duo processor

Questions au sujet de 580 Voir tout

LCD screen backlight no power

I had to take a part my mac to change hard drive, i disconnected the lcd display backlight connecotrs and marked them.

Now when i try to start my imac again.. it seems to not get any power on the screen, also i am not sure the computer is botting up at all sonce i can see the fans going buit i dun hear the apple sound related to the boot up process.

Do the 4 connectors have a specific order i might have messed up?

Could it be something else? preventing the imac form booting up and energizing the screen?

Une réponse ! View the answer J'ai le même problème

Cette question est-elle utile ?

Score 0
Ajouter un commentaire
Répandez la magie de Noël
Obtenez 12 $ de réduction sur les commandes de 50 $ ou plus avec le code FIXMAS12
Répandez la magie de Noël
Obtenez 12 $ de réduction sur les commandes de 50 $ ou plus avec le code FIXMAS12

1 réponse

Solution retenue

Yes could be any cable you disconnected, go over your connections again. Many times DIYers "think" they have solid connections when they are not square or complete.

If this answer is acceptable please remember to return and mark it.

Cette réponse est utile ?

Score 1

Commentaires:

I have taken it apart several times, and checked the connections, besides all you need to disconnect for the screen are the 4 ac power connectors plus the data one, so i was wondering if there is a safe way to check the voltage on those connecotrs in a safe way since i have been told they are supposed to be very high power and a regular tester would not work.

I own a Fluke tester 77 series.. would it be safe to test them with it?

par

Ajouter un commentaire

Ajoutez une réponse

Javier sera éternellement reconnaissant.
Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 0

Total : 144