Aller au contenu principal

4ème génération de l'Apple iPhone. La réparation est relativement simple, mais la vitre avant et le LCD doivent être remplacés ensemble. GSM / capacité de 8, 16 ou 32 Go / Modèle A1332 / noir et blanc.

2375 questions Voir tout
Question close

Why is my vibrator staying on after screen replacement?

I have just replaced the screen on an iPhone 4 and when I plug it in the vibrator stays on! I have replaced about 8-10 screens for friends but the only thing I have done differently this time is I damaged and had to replace the home button. Any suggestions on what I may have done wrong?

Répondre à cette question J'ai le même problème

Cette question est-elle utile ?

Indice 0

2 commentaires:

is this a 4 for gsm or cdma?

par

Hi, It's a gsm phone

par

Ajouter un commentaire

2 Réponses

Have you tried:

Just Hold The Power/Lock Button And The Home Button At The Same Time For About 10 Seconds Until The Apple Logo Pops Up On Your iPhone's Screen

Just works as a reboot, not 100% sure it will work. If not its might be something internal that has changed.

Cette réponse est-elle utile ?

Indice 0

1 commentaire:

Hi I tried that but didn't seem to help. The battery is dead flat and when I plug it in the vibrator starts operating. Almost seems I have a crossed wire or similar. Not sure how?

par

Ajouter un commentaire

make sure the dock connector is seated properly. be sure to check to see if there is any debri or corrosion.

Also try cleaning the connectors that touch the vibrating motor. make sure the screws are fastened all the way down and there is no corrosion.

Other than those two things there really isn't much you could've done to create this error. is it up to date on software?

Cette réponse est-elle utile ?

Indice 0
Ajouter un commentaire
Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 0

Total : 76