Réparez vos affaires Communauté Boutique

1.83 GHz Core Duo or 1.83, 2, or 2.16 GHz Core 2 Duo A1208 (EMC 2104/2110/2114/2124)

201 questions Voir tout
Question close

Options

Question mark, hdd stop being recognized but still working

iMac a1195 2006 intel

HI guys,

First sorry for my bad english

Second i have 2 some imacs im my school and my job is to fix the issues.

First imac stop recognize hdd after set firmware password. HDD is working with other imacs. I repalce sata and power cable and still not working.

Second imac is restarting after some seconds after power on imac. Screen is black and nothing happen. Fans are working and ther is restart.

Any ideas?

Regards

Spamm3r (contact: tspamm3r@gmail.com)

Répondu ! Afficher la réponse J'ai le même problème

Cette question est-elle utile ?

Oui Non
Indice 0
1 commentaire

Can you give us the last 3 digits of your systems (2) serial numbers so we can correctly identify your systems.

par

Ajouter un commentaire

2 Réponses

Filtrer par :
Les plus utiles Les plus récentes Les plus ancien(ne)s
Solution retenue

Options

Take out one of the memory modules out and restart your system. See if that clear the password (if it did re-install your memory). Otherwise you'll need to boot up under the installer CD/DVD that came with your system. The far right menu choice allows you to reset the password.

Cette réponse est-elle utile ?

Oui Non
Indice 2

3 commentaires:

first, i dont have any prompt to type password, only flashing grey question mark.

Second, i have removed ram and nothing happens

par

A question mark implies your OS is missing or damaged or the HD is no longer working or the wrong type for your system.

par

Do you have the grey CD/DVD that came with your system or the retail version of OS-X?

par

Ajouter un commentaire

Options

iMac Intel 17" and installed system is 10.4. Yes i have installation disc. But when i connect this hdd to other iMac, system was booted properly.

Cette réponse est-elle utile ?

Oui Non
Indice 0

5 commentaires:

Was the other system the same as yours (identical)?

par

yes, i have only 10.4 installed on all imacs

par

Start the system with the Grey Apple Install CD/DVD. Then go to the control panel and check what the startup disk setting is set to. Does the drive show up and was it set for it?

par

dirve doesnt shows up but i will try with installation disc

par

So the power or SATA cable is not fully connected or is bad. Do you have an external FireWire case to install your HD into? If you do you could try running your system from the FireWire port with your internal disk.

par

Ajouter un commentaire
Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 0

Total : 161