Réparez vos affaires Communauté Boutique

Deuxième génération de l'iPhone. Modèle A1241 / capacité de 8 ou 16 Go / coque arrière noire ou blanche. La réparation est plus simple que pour l'iPhone de première génération et nécessite des tournevis, des outils pour faire levier et une ventouse.

1158 questions Voir tout

Options

What do the numbered ribbon cables do specifically?

I recently replaced a cracked display, and also a battery in my iPhone 3G. Worked great for a few weeks until the white screen of death started to appear when I press the menu button or the power button. Lately it is getting worse. I can get the display to work with persistance, but it's a pain.

I am wondering if maybe one of the cables is loose or something. I have taken it a part a few more times and disconnected and reconnected a few of the ribbon cables, (helps a little bit- but the white screen eventually returns) but I would like to know what ribbon cable corresponds to the display, or what part I can look at to see if maybe I reconnected it poorly.

anyone?

Répondu ! Afficher la réponse J'ai le même problème

Cette question est-elle utile ?

Oui Non
Indice 3
2 commentaires

Is this the part you're talking about? iPhone 3G/3GS Headphone Jack Assembly

par

no, I mean the ribbon cables that are labeled 1, 2, 3, 4, 5 and 6. like this one, for example:

http://s1.guide-images.ifixit.com/igi/pw...

par

Ajouter un commentaire

4 Réponses

Filtrer par :
Les plus utiles Les plus récentes Les plus ancien(ne)s
Solution retenue

Options

Cable 1 LCD display

Cable 2 Touchscreen sensor and home button

Cable 3 earpice speaker and proximity sensor

4,5,6 are I believe GPS, antenna and camera cables.

That is what I can tell by opening it up.

Cette réponse est-elle utile ?

Oui Non
Indice 6

6 commentaires:

You are correct about most of them- However, 4,5 & 6 are actually dock connector, headphone/volume/power/vibration, and antennas, respectively. :)

par

Good to know Josh.

par

Very strange, I snapped part of the volume rocker cable (as we know connected to the earphone jack and power) now my home button isnt working, what do you think is up with that!? any help? thanks :)

par

This was very helpful. I am the kind of person who likes to check things before finishing up. I had the screen lose before tightening the last two screws and tried testing it but the home button was not working.

The reason the home button was not working was because it is connected once you push the screen in closed.

Once again, very helpful and good information. Thanks!

par

Afficher 1 commentaire en plus

Ajouter un commentaire

Options

the home button has it's own contacts that connect when the device is closed, it isn't fed through ribbon cable 2

Cette réponse est-elle utile ?

Oui Non
Indice 4

2 commentaires:

quite right, well spotted! +

par

I would advise people to be careful when opening and closing their iphone's, as i managed to break the little contacts off (both of them) and had to solder two small wires bent in a "U" shape, to replace the functionality of the previous contacts.

par

Ajouter un commentaire

Options

Although the home button is a separate entity and connects upon closing, if cable four is disconnected the it will not work.

Cette réponse est-elle utile ?

Oui Non
Indice 0
Ajouter un commentaire

Options

sometimes the ribbon on the display lcd goes bad and you will get a white screan. replace full assemble should work . i had the same problem replaced the full lcd srean and it works great. good luck.

Cette réponse est-elle utile ?

Oui Non
Indice 0
Ajouter un commentaire

Ajouter une réponse

James Elston sera éternellement reconnaissant.
Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 9

Total : 72,458