Aller au contenu principal

La version Wi-Fi de l'iPad Air d'Apple, numéro de modèle A1474. Disponible en gris sidéral ou argent, il emploie le processeur A7 personnalisé et est livré dans des configurations 16, 32, 64 et 128 Go.

299 questions Voir tout

connecting charging port ribbon cable to circuit board

How does the charging/docking port ribbon cable secure to the circuit board the ribbon cable seems like it was glued with epoxy or somthing .not sure ..way to small for solder..it was originally attached flat to the board...

Répondu ! Afficher la réponse J'ai le même problème

Cette question est-elle utile ?

Indice -1
Ajouter un commentaire

2 Réponses

Solution retenue

The charging port ribbon cable comes with it's own adhesive, so it can be glued on.

You can see the link of dock connector flex cable replacement, the area with blue film is where the adhesive on.

Cette réponse est-elle utile ?

Indice 0
Ajouter un commentaire

I had to remove the motherboard to check this out the other day. It is soldered to the board. Not glued.

Cette réponse est-elle utile ?

Indice 0
Ajouter un commentaire

Ajouter une réponse

greg sera éternellement reconnaissant.
Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 0

Total : 755