Aller au contenu principal

Deuxième génération de l'iPhone. Modèle A1241 / capacité de 8 ou 16 Go / coque arrière noire ou blanche. La réparation est plus simple que pour l'iPhone de première génération et nécessite des tournevis, des outils pour faire levier et une ventouse.

1158 questions Voir tout

Why isn't my Home button Not Working?

I resently took apart my phone. I manage to put every thing back and it works. but The home button isn't responding at all. I need help! oh I also Switched the motherboard with an 8gb so no i have a 16gb with an 8g housing.

Répondu ! Afficher la réponse J'ai le même problème

Cette question est-elle utile ?

Indice -1
Ajouter un commentaire

1 Réponse

Solution retenue

I would first check the contacts of the home button - maybe the are bent a little bit

Cette réponse est-elle utile ?

Indice 2

5 commentaires:

Do you Know what i should Do because I dont want to remove the Black covering(home button)

par

I think that there are not so many options left - imho - disassembling is the only option

par

I think i may of found out the problem. The prongs that deal with the home button isnt touching the other prongs on the speaker system. Hmm just a little pressure in areas will get it moving but soon failed Suggestions?

par

I would try to bend them a little bit

par

If anyone is still looking here is what I have found.

1. After replacing the lcd/digitalizer or rear cover ensure alignment with home button prongs is accurate.

2.Ensure both prongs are intact and are in a position to reach the motherboard gold contacts when closed.

3. Also (and my issus was) ensure connector labeled "4" is connected, this is the flex cable connection the home button to the motherboard. Best of luck

iGuru Technologies

par

Ajouter un commentaire

Ajouter une réponse

Steven Bolds sera éternellement reconnaissant.
Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 0

Total : 6,523