Réparez vos affaires Communauté Boutique

La cinquième génération de l'iPhone. La réparation de cet appareil est simple, mais nécessite des tournevis, des outils pour faire levier et enfin de la patience. GSM/CDMA en 16, 32 ou 64 Go / iPhone noir ou blanc.

2193 questions Voir tout

Options

Bottom screws won't come out, just spin in place.

After replacing the battery and back cover on my iPhone 4S, I replaced the pentalobe screws on the bottom of the phone with phillips screws from the iFixit liberation kit.

I'm having two problems:

1) The screws are not flush with the bottom edge of the phone and won't go in any farther. They are almost all the way in, but not quite.

2) The screws won't come out. I can turn them clockwise or counterclockwise, but they don't go in or out. They just spin in place.

Neither of these is a big problem right now, though I'd prefer that the screws go all the way in and sit flush. My concern is that I can't open up the phone if I need to make another repair in the future.

Any idea what is going on here? Is there anything I can do about it?

Répondre à cette question J'ai le même problème

Cette question est-elle utile ?

Oui Non
Indice 12
Ajouter un commentaire

4 Réponses

Filtrer par :
Les plus utiles Les plus récentes Les plus ancien(ne)s
Réponse la plus utile

Options

Sounds like the screws are stripped. You may want to try some of these tricks to remove them: What are your tips/tricks for removing or extracting stripped screws?

Cette réponse est-elle utile ?

Oui Non
Indice 2
Ajouter un commentaire

Options

If they are just spinning just try sliding the back cover up

Cette réponse est-elle utile ?

Oui Non
Indice 2

2 commentaires:

this actually fixed the problem thank you.

par

What dobyou mean slide the back cover up

par

Ajouter un commentaire

Options

I need help with that my creen went all black it son but just the screen and it makes noices when i plug in the charger and idk what to do, were do you think i should put it???

Cette réponse est-elle utile ?

Oui Non
Indice 2

2 commentaires:

and it just wont work:(

par

What do you mean?

par

Ajouter un commentaire

Options

With cheaper (vendor-supplied) drivers, the shaft sometimes loosens. It looks and feels like the screw is turning, because the handle is turning. In fact, it is only the handle that is turning; the shaft (and the screw) remain stationary. Strange, but it happens. Solution: try another screw-driver.

Cette réponse est-elle utile ?

Oui Non
Indice 0
Ajouter un commentaire

Ajouter une réponse

sbroberts sera éternellement reconnaissant.
Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 5

30 derniers jours : 26

Total : 36,127