Aller au contenu principal

La deuxième génération de l'iPad avec les modèles Wi-Fi, GSM et CDMA. Certains modèles ont été rafraîchis avant l'iPad 3. La réparation est difficile, nécessitant de chauffer les parties collées, ainsi que de la précision et de la concentration afin de judicieusement détacher les différents composants.

730 questions Voir tout

Ipad needs to cool down before use it!

I Bougth an used ipad and after several minutes I get this message " Ipad needs to cool down before use it". The ipad is not hot. I tuned off the ipad and turn it on again, then after several minutes again. I get this message. The process is repeated every time. Please advice.

Répondu ! Afficher la réponse J'ai le même problème

Cette question est-elle utile ?

Indice 0
Ajouter un commentaire

5 Réponses

Solution retenue

Have you tried restarting it and then try wiping it down and carefully re-install your apps (Apple App Store apps only). Is it now stable?

If either fixed it, something you have downloaded or installed is using the CPU hard so your iPad is overheating.

Cette réponse est-elle utile ?

Indice 1
Ajouter un commentaire
Réponse la plus utile

This is board damage. I have seen it before. If you have a hard time finding someone to repair it, you could look into my complex diagnosis repair on my website (click through my profile to find)

Jessa

Cette réponse est-elle utile ?

Indice 3
Ajouter un commentaire

One advice:

Don't buy second-handed stuff that you can't inspect throughout unless you absolutely trust the seller.

iPads are difficult to inspect/repair but easier to fake good condition. This iPad probably have been improperly repaired from water damage as water damage is the most common cause of false overheating alarms.

Cette réponse est-elle utile ?

Indice 2
Ajouter un commentaire

After opening up the ipad, i found that the PMIC has been repaired by Apple before. There was also alot of solder ball around the area. C8155 and C8156 had some solder lead almost shorting at each other. So I took a tin foil to cover PMIC before removing both caps. I was using small noozle and heat around 315 deg to remove the cap. After reworking, testing the board now.

Cette réponse est-elle utile ?

Indice 0

1 commentaire:

Repaired by somebody---probably not Apple. Correctly done BGA should not leave solder balls---that is a sign of too high heat.

par

Ajouter un commentaire

This is bullshit. Apple knows why this is happening. It's programmed obsoletion and I won't be party to it. I'm switching to Samsung.

Cette réponse est-elle utile ?

Indice -3

6 commentaires:

Really, so anyone who has a working unit (most of us) just don't know it's obsolete. We have over 200 of the iPad2 units in the field and they are all cool to the touch an we are using the latest version of the apps we use.

par

It is simple component damage. Not unlike a brake sensor on a car failing after a couple of years. But maybe you're right. Toyota is bullshit, I'm switching to Honda.

par

So if anything breaks, it's Apple's fault?

par

No, Honda is bullshit I'm getting a Kia! ;-}

par

I think it's all bullshit. Buy a bicycle;-)

par

Afficher 1 commentaire en plus

Ajouter un commentaire

Ajouter une réponse

Ramon sera éternellement reconnaissant.
Nombre de vues :

Dernières 24 heures : 3

7 derniers jours : 21

30 derniers jours : 70

Total : 7,566