Réparez vos affaires Communauté Boutique

Modèle n° A1367 / 8,16,32 ou 64 GB de capacité

914 questions Voir tout

Options

Touch screen is not recognizing my touch/commands

I used the itouch 4gen repair guide. bought the parts and seem to have no problem to after connecting the copper wire(guess its the LCD). Once I powered on the device I see the screen fine.

The only problem is the itouch will not recognize my fingers. I have swiped, touched and nothing happens.

I clipped in the black tape(guess the digitizer tape) to the logic board and made sure it did not fall out. secured the metal plate back on and turned it on. Whats wrong?

Répondu ! Afficher la réponse J'ai le même problème

Cette question est-elle utile ?

Oui Non
Indice 1
Ajouter un commentaire

1 Réponse

Filtrer par :
Les plus utiles Les plus récentes Les plus ancien(ne)s
Solution retenue

Options

The digitiser cable is not fitted securely when you think it is seed correctly place the motherboard back in its place then directly above were the digitiser was plugged in push down on the motherboard this will snap the connecter in place you should hear it connect in place

Cette réponse est-elle utile ?

Oui Non
Indice 1

1 commentaire:

It worked thank you so much!!!

par

Ajouter un commentaire

Ajouter une réponse

Sarah sera éternellement reconnaissant.
Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 0

Total : 52