Réparez vos affaires Communauté Boutique

La cinquième génération de l'iPhone. La réparation de cet appareil est simple, mais nécessite des tournevis, des outils pour faire levier et enfin de la patience. GSM/CDMA en 16, 32 ou 64 Go / iPhone noir ou blanc.

2193 questions Voir tout
Question close

Options

Help Identify These 2 Parts

Hi guys,

I did a screen replacement on a friend's iPhone 4S, and there are 2 small parts left over for which I cannot figure out where they belong.

http://imageshack.com/a/img540/1775/bXrV...

It can't connect to any mobile or wireless network, so that probably has something to do with it but so far I can't spot any such parts in the instructions here.

Remplacement de l'écran de l'iPhone 4S

It's kinda urgent - I need to return it on Monday. Please help.

Répondre à cette question J'ai le même problème

Cette question est-elle utile ?

Oui Non
Indice 0
Ajouter un commentaire

1 Réponse

Filtrer par :
Les plus utiles Les plus récentes Les plus ancien(ne)s
Réponse la plus utile

Options

The black one (left) goes at the top screw of the battery connector. This piece goes under the battery connector tab, then the top battery screw goes though both. The gold peice (right), goes above the the main camera at the top of the iPhone. It goes on top of the logic board at the left top screw of the logic board. Logic board, then piece with prongs behind (above camera) then the screw goes through it. Then the black tape is applied.

Cette réponse est-elle utile ?

Oui Non
Indice 4

6 commentaires:

Hi Brad, thanks alot for your help. I managed to put back the battery connector bit, but still can't figure out the logic board part. Is there a photo around showing this part's installation or could I trouble you to add some arrows to photos please? iFixit is really lacking in the "beware-of-tiny-bits-falling-out" department.

Examples:

https://d3nevzfk7ii3be.cloudfront.net/ig...

https://d3nevzfk7ii3be.cloudfront.net/ig...

par

https://d3nevzfk7ii3be.cloudfront.net/ig...

The order from top to bottom is screw, part, logic board. If you still have the black tape, that goes on top of the screw.

par

https://d3nevzfk7ii3be.cloudfront.net/ig...

shows the orientation of the part to the camera bay, but it goes on top of the logic board at this location. The photo is missing the logic board, which should be under the part here. But it shows how the part should be. Logic board, part on top of logic board, then the screw. Then the black tape.

par

Fantastic crystal clear explanation, Brad. +1 Thank you. However, I'm still not able to get a cell signal, iPhone just keeps saying "searching". Looks like the 2 parts didn't have anything to do with reception. Is this part of a bigger problem and should I start a new question on it or is there something simple that I might have missed putting it back together?

par

Make sure antenna cap on black wire near battery connector is correctly attached. Set time on iPhone correctly. Reset, hold both home and power buttons for about 10 seoconds until iPhone restarts itself. Reset network settings.

par

Afficher 1 commentaire en plus

Ajouter un commentaire
Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 0

Total : 329