RÉSOLU : Logic board or power supply malfunction - iMac Intel 21.5" EMC 2428

Logic board or power supply malfunction

I tried to put ssd drive in my imac mid-2011 , and then I tried to turn it on , I heard the sound of the drive and nothing else happens , it just turns off . I turned off the display to get to the logical board. 1 led lights when I press the power button led 2 turns on and shuts off immediately . sometimes led lights 3 lights , I hear the sound , and it breaks not completed . tried to reset smc but failed. tried to include imac when the fans are running at full Power steering . In this mode, imac is behaving strangely , the fans turn on one by one after every reboot .

Questin is translated by Google translate, sorry I'm not English

Répondu ! Afficher la réponse J'ai le même problème

Cette question est-elle utile ?

Oui Non

Indice -1

1 commentaire

Give us both your native language and the translation sometimes it helps ;-}

7 déc. 2014 par Dan

Publié: 7 déc. 2014

Options

Did you take the HD out and replaced it with a SSD? Or did you add the SSD (dual drive setup)?

Try disconnecting the SSD cables to see if the system will start then. If you still have the HD in you should boot up, if you took the HD out you should see a blinking question mark in a folder icon.

Cette réponse est-elle utile ?

Oui Non

Indice 1

2 commentaires:

I add ssd, not replace.

I try with ssd and try without ssd boot up iMac, but nothing happened...

When I press the power button, hear some noise - CD-ROM, look like try to start but cant

7 déc. 2014 par imullika1

Recheck your connections between the system and display. Did you damage or forget a connection?

7 déc. 2014 par Dan

Ajouter un commentaire

iMac Intel 21.5" EMC 2428

Logic board or power supply malfunction

1 Réponse

Ajouter une réponse