Aller au contenu principal

4ème génération de l'Apple iPhone. La réparation est relativement simple, mais la vitre avant et le LCD doivent être remplacés ensemble. GSM / capacité de 8, 16 ou 32 Go / Modèle A1332 / noir et blanc.

2375 questions Voir tout
Question close

Changed power button flex cable. phone wont turn on now.

So I was changing the power button flex cable on an I Phone 4 because the power button wasn't working as it wasn't clicking, nor was it even press able. So I changed it and all that, now nothing will turn on. I plugged the phone in to a charger and it was vibrating and making some noises, but the screen was dead. Nothing at all, not the apple logo, nothing. I tried a new screen, still nothing. I feel like the board just went bad.

Répondu ! Afficher la réponse J'ai le même problème

Cette question est-elle utile ?

Indice 0
Ajouter un commentaire

1 Réponse

Solution retenue

Did you take the screen out when fitting a new power flex? If not that's wat caused the screen not to work as you cannot bent the screen cables forward without damaging them.

Plug the phone into a laptop and open iTunes then check if the phone is reconised if battery is dead the phone won't reconise so leave it 20 minutes

Cette réponse est-elle utile ?

Indice 0

1 commentaire:

I will try that thank you.

par

Ajouter un commentaire
Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 0

Total : 110