Rep: 9
1
1
Hey I change the digitizer on my iPad 2 then power and volume nothing was working , So I had to connect it to the pc and reset it ,I replace the control harness and still not working then I change the power supply board and still not working , plus it doesn't lock with the case , I have no idea what else to do , help
william, 1 minute ago
Cette question est-elle utile ?
Rep: 5,3k
9
15
4
Maybe it's a defective replacement power/volume ribbon cable or it was damaged during installation. They are very delicate. You may want to try a higher quality cable as the cheaper ones don't seem to work with the auto lock function (as has been my experience).
Cette réponse est-elle utile ?
I may add that you have to be sure that the new Power-Mute-Volume cable that you installed is properly seated and connected to the board, and the big interconnect cable (the one that looks like the display/LCD cable) is also properly seated.
All the problems you are referring seem to be due to a defective Power-Mute-Volume cable like Brian says.
Thank you , yea I'll double check , where can I get a better parts , Apple store only ?
Dernières 24 heures : 0
7 derniers jours : 0
30 derniers jours : 0
Total : 938
2 commentaires
Thanx it is well connected, but I'll double check , so getting a better cable mean buying it on Apple store ?
par william
Apple Store doesn't sell parts for repairing your device. iFixit sells quality repair parts but you are paying a little extra for them. Other users may be able to chime in with other options.
par Brian