Rep: 37
2
1
I had replaced my screen after 60 days from broken.
The touch screen and everytging is working fine, except that the spen is not working in the whole screen.
Exactly acrectangle 2 cm below the screen top with length of 4 cm and width of the screen is not recognizing the spen, otherwise the spen works great.
What can be the problem ?
Thx
Ahmed Ismail
Cette question est-elle utile ?
Rep: 9,5k
20
18
16
Perhaps the digitizer itself is faulty, or maybe the stylus sensor film is damaged in the LCD and digitizer replacement you replaced. The s pen works through the stylus sensor film in the screen.
Cette réponse est-elle utile ?
Had the same problem. Disconnected and reconnected the two big flex cables that connected screen to mither board.
Perfect after that.
Cette réponse est-elle utile ?
I have had the same problem. Dropped the phone and had to replace the LCD Unit. Touch screen working perfect but S pen doesn't work anywhere on the screen except towards the top and lower parts of the screen. Pen detection sensor working fine. Do I need to get a new screen again ?
Cette réponse est-elle utile ?
Dernières 24 heures : 1
7 derniers jours : 5
30 derniers jours : 15
Total : 4,740
