Aller au contenu principal

L'Apple iPhone 5s fut annoncé le 10 septembre 2013. La réparation de ce modèle est très similaire aux modèles précédents et requiert des tournevis ainsi que des outils pour faire levier. Disponible en version GSM ou CDMA, 16/32/64 Go de stockage et en argent, doré ou gris sidéral.

3530 questions Voir tout

Left side of screen not working - Cannot press 'Q' '1'

After replacing the screen on my iPhone 5s (16GB white and silver) the left side has some daed spots, I cannot press 'Q' or '1' in portrait, the bottom left icon also doesn't work.

What should I trouble shoot? There are no strange lines or screen bleeds.

Répondre à cette question J'ai le même problème

Cette question est-elle utile ?

Indice 1
1 commentaire

Thanks guys, indeed the iPhone was bent, I did bend it back and didn't think it fit with pressure. I'll check with the screen not inserted, to see if it's caused by the frame.

par

Ajouter un commentaire

2 Réponses

Réponse la plus utile

I would open it back up again and reconnect the digitizer cable, maybe there is some dirt in the connector? Give it a wipe with isopropyl if you have any. If that doesn't work, it might suggest that the new screen is faulty. Also check the phone is not bent, did you have a hard time getting the screen to clip back into the frame? I once did a screen repair on a 5S, that had similar problems you describe, on close inspection, I noticed the iPhone was bent, and so the new screen was obviously bending to the shape of the frame.

Cette réponse est-elle utile ?

Indice 1
Ajouter un commentaire

Make sure you screen is not being pressured by anything. Try loosing the LCD Shield plate scews and check the phones reaction. As Michael stated, if the iPhone is bent, the new screen will follow the shape of the frame and it would damage the new screen. If there's no line on your screen and everything is shining bright, the cables are probably not the cause of your issue.

Regards,

Bruno

Cette réponse est-elle utile ?

Indice 1

2 commentaires:

Bought the gTool and got the corners perfect. Screen fitting good.

That did not solve it, when I remove the metal backplate it seems the screen responds better, the plate doesn't look bent. Whattodo whattodo

par

Ey Giovanni. Three years later I’m facing the same problem in my 5s. What did you do to solve it? Thanks!

par

Ajouter un commentaire

Ajouter une réponse

Giovanni Joubert sera éternellement reconnaissant.
Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 2

Total : 13,899