Aller au contenu principal

Le premier modèle d'iPhone, modèle A1203 avec 4 ou 8 Go de stockage, et coque en aluminum. Les réparations sont souvent basées sur le principe du levier et peuvent demander de la soudure quelques fois.

224 questions Voir tout

Lines across bottom of screen

I have 2-3 thin lines across the bottom of my 1st generation iPhone. It does not prevent me from moving the lock screen button and getting on to the main screen, but I would like the phone to be in perfect condition. Can you tell me what part needs to be replaced and how difficult a job it is to do??

Répondre à cette question J'ai le même problème

Cette question est-elle utile ?

Indice 1
Ajouter un commentaire

3 Réponses

Réponse la plus utile

Here is a list of steps you can try!

  • Software issues
    1. Restore (Google it) Back up first!


  • Hardware Problems
    1. Bad Screen (Change It!)
    2. Bad Logic Board (Change it too! HARD and Back Up first!)

Hope I helped!

Cette réponse est-elle utile ?

Indice 1
Ajouter un commentaire

Original iPhone front screen replacement is among the most difficult iPhone repairs there is. Watch a few youtube videos to see the process. Unless you have extreme skill, you will not even be able to open this iPhone without permanent damage to the iPhone case. In the future, if the battery eventually fails, battery replacement is much easier, but again, a very difficult process. The Original iPhone is not a repair friendly iPhone.

Cette réponse est-elle utile ?

Indice 0
Ajouter un commentaire

I assume it is CHEAPER if you buy a used NEWER iPhone for less than 100 € than trying to replace the display !

I have the same problem since several years, and have upgraded first to 3g and now a 4s model in the meantime

Cette réponse est-elle utile ?

Indice 0
Ajouter un commentaire

Ajouter une réponse

pbassey sera éternellement reconnaissant.
Nombre de vues :

Dernières 24 heures : 1

7 derniers jours : 3

30 derniers jours : 4

Total : 580