Rep: 1
1
The tools listed here MacBook Pro 15" Unibody Mid 2012 Logic Board Replacement are not helpful. I'm looking for a torq-set screw size which come in size 6, 8 or 10. I do not know the correct size for the screws which hold the Airport Bluetooth Card Bracket. The screws can be seen in this photograph.
Cette question est-elle utile ?
Rep: 259
4
1
The logic board replacement instructions seem to indicate that it uses T6:
MacBook Pro 15" Unibody Mid 2012 Logic Board Replacement
Edit:
The screws in your image are most definitely Philips. I can't place the location against anything similar in the guides, but I'm guessing #00 based on the AirPort/Bluetooth guide:
Remplacement de la carte AirPort/Bluetooth du MacBook Pro 15" Unibody mi-2012
Edit 2:
I found the item depicted in the picture. It appears to be one of the retaining clips screwed to the upper case. This one appears to be between the battery and the optical drive. You shouldn't need to remove them, they were not removed during the teardown.
Tutoriel
Difficulté :
Modérée
Tutoriel
Difficulté :
Modérée
—
30 minutes - 1 hour
Tutoriel
Difficulté :
Difficile
—
30 minutes - 2 hours
Cette réponse est-elle utile ?
Dernières 24 heures : 0
7 derniers jours : 0
30 derniers jours : 0
Total : 308
4 commentaires
Which MBP 15"? Please give us the last four figures of your serial number.
par mayer
Serial No.: CO2JM3FMDV35
par Kyle Wegner
Apple MacBook Pro "Core i7" 2.6 15" Mid-2012 Specs
Identifiers: Mid-2012 15" - MD104LL/A - MacBookPro9,1 - A1286 - 2556*
par mayer
william hit the correct guide. Each guide lists the tools needed in the peramble.
par mayer