Replaced the screen assembly and during the process, pulled too hard on one of the connectors and it snapped. Is it possible/worthwhile to replace the one connector or did I just break the entire screen?
Thanks!
Cette question est-elle utile ?
Rep: 5,3k
9
15
4
If the cable snapped, you will need to replace the entire assembly. There is no way to just repair the cable.
Cette réponse est-elle utile ?
Rep: 24,4k
35
16
30
I agree with Brian. The torn cable you describe, seems to be the digitizer flex cable. The power wires are part of the LCD flex cable.
Cette réponse est-elle utile ?
Dernières 24 heures : 0
7 derniers jours : 0
30 derniers jours : 0
Total : 39
1 commentaire
The specific cable connector in question is the longer, horizontal to the body cable from the power and sensor cable assembly. My fear is that it's the power cable. Just curious if it's worth replacing that part or just getting another screen assembly.
par codyspriggs