Réparez vos affaires Communauté Boutique

Ipad Mini 7,9" avec 16,32 ou 64 Go de stockage.

630 questions Voir tout

Options

LCD flickers and has lines - LCD or logic board?

Hi,

I did a digitizer replacement that I thought went fairly well, however, when I turned the unit on, it showed the apple logo and started flickering with lines. It appears to have powered up normally because it does show the client's locked screen background picture, it just flickers and is full of lines. It also swipes to a jumbled passcode screen. I'm ordering a new LCD and hoping for the best, but do you think this is more likely an LCD or a logic board issue or am I just going to have to wait and see? Thanks.

Répondu ! Afficher la réponse J'ai le même problème

Cette question est-elle utile ?

Oui Non
Indice 0
Ajouter un commentaire

2 Réponses

Filtrer par :
Les plus utiles Les plus récentes Les plus ancien(ne)s
Solution retenue

Options

It's the LCD.

iPad Mini's LCD's are very fragile and break very easily when you pry them out and off the metal shield to which they are glued.

Sometimes you get away with it and break them on the way back in :) Sad but true..

One advice: tread very very lightly when you repair iPad Mini's, especially around those LCD's. You can very easily loose money repairing them.

Cette réponse est-elle utile ?

Oui Non
Indice 2

3 commentaires:

Thanks for the reply. I'm definitely losing money on this repair. I'll watch the cable when I do the installation.

par

What cable?

It's the LCD which is damaged, not the cable in my opinion.

par

By the way, specially for iPad Mini's, you should AT LEAST charge the cost of 1 digitizer + 1 LCD. This way if you break the LCD, you're still covered to at least not loose money.

par

Ajouter un commentaire

Options

I don't know if it's too late to answer this problem, but I do it anyway if anyone has the same problem.

I replaced screen on Ipad mini 3 for a customer for about 7 months ago, now he came back with LCD flickering with many lines both on vertically and horizontally. My boss said it cause from bad LCD, there is only 1 way to do is replace the new LCD. My customer left it here for than a month. Some times I opened it and look at that, it still flickering with too many lines as above. This morning, the owner of Ipad called to see if Ipad can be fixed, I told him to replace the new LCD, but it's very expensive, he said no, and will buy the new one. After talking to him I "slapped" the case of Ipad(the Ipad has case with front cover, we can open it like a book) and when open it again, the Ipad become normal. There is no lines no flickering... and it working fine now. Can any one tell what wrong with it in the first place?

Cette réponse est-elle utile ?

Oui Non
Indice 0
Ajouter un commentaire

Ajouter une réponse

bjblatz sera éternellement reconnaissant.
Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 4

Total : 8,832