The non-magenetic screw instruction is wrong
Three times, I’ve tried to correct the non-ferrous/non-magnetic screw instructions for both the 5 and 5s.
Each time, the correction was denied by iFixit staff.
Why? It’s obvious to anyone who has fixed a 5 or 5s that the instructions are wrong, and worse, the instructions that are there on the site will damage the device and screw with the magnetometer when reassembled.
The non-magnetic screw is longer and in the upper right, not shorter or in the lower left.
Why were the corrections denied and why three times?
Cette question est-elle utile ?