Aller au contenu principal

Tutoriels de démontage et réparation MacBook Pro, la ligne d'ordinateurs portables conçue pour les utilisateurs professionnels. À ce jour, la gamme MacBook Pro inclut des versions 13, 14, 15, 16 et 17 pouces avec des changements majeurs définies par les designs pré-unibody (d'origine), unibody, écran Retina, Touch Bar et SOC (système sur une puce).

19983 questions Voir tout

DVD/CD player does not function after replacing hard drive

I installed a greater capacity hard drive on a friends MacBook Pro.

The drive works perfectly, but the CD/DVD player will now recognize nothing--no CDs nor DVDs.

We don't live in the same country at the moment, so I can't reopen the case to look for the problem.

Any ideas as to the cause? I don't think I touched any other connectors, but perhaps I accidentally did.

Thanks

Stan Kossen

Répondu ! Afficher la réponse J'ai le même problème

Cette question est-elle utile ?

Indice -1
Ajouter un commentaire

1 Réponse

Solution retenue

Go to the system profiler to see if the drive is even seen for a possible disconnect. I would reset the SMC and PRAM. How was the system restored on the new drive?

Cette réponse est-elle utile ?

Indice 2

3 commentaires:

Mr Mayer. Thanks for the response. The system was restored with a clean install of Snow Leopard.

par

HOW did you do the clean install? If in target mode, was the processor a G5 or Intel?

par

I think I misled. I clean installed Leopard before I changed the hard drive. I made a SuperDuper clone of the internal hard drive. Then I booted from the SuperDuper clone, and copied that to the internal hard drive.

It is has an Intel processor. Thanks for your interest and input.

Later I changed the internal HD, and it was then that the DVD no longer functioned.

par

Ajouter un commentaire

Ajouter une réponse

Stan Kossen sera éternellement reconnaissant.
Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 0

Total : 1,772