Aller au contenu principal

4ème génération de l'Apple iPhone. La réparation est relativement simple, mais la vitre avant et le LCD doivent être remplacés ensemble. GSM / capacité de 8, 16 ou 32 Go / Modèle A1332 / noir et blanc.

2375 questions Voir tout
Question close

Volume up and ringer buttons not working

My iphone fell off my desk. Volume up and ringer not working anymore. Volume down is working fine. The device is silent. All sounds work perfectly and when toggling silent through software, silent and unsilent modes work normally. No visible damage happened to the exterior of the iphone at all .

Répondu ! Afficher la réponse J'ai le même problème

Cette question est-elle utile ?

Indice 0
Ajouter un commentaire

1 Réponse

Solution retenue

The shock could have damaged the button or the ribbon cable that connects the buttons to the motherboard. I had the same issue with the power button.

This guide will show you how to replace the cable/buttons: Remplacement des boutons de volume de l'iPhone 4

Remplacement de la nappe de la prise casque et du volume de l'iPhone 4

Image iPhone 4 Boutons de volume

Tutoriel

Remplacement des boutons de volume de l'iPhone 4

Difficulté :

Difficile

Image iPhone 4 Nappe de la prise casque et du volume

Tutoriel

Remplacement de la nappe de la prise casque et du volume de l'iPhone 4

Difficulté :

Difficile

Cette réponse est-elle utile ?

Indice 0

2 commentaires:

Should i change them both or just the buttons. Since the volume down is working, doesn't this indicate that the cable is working ??

par

The ribbon cable is very fragile, maybe a junction with the volume up button broke, but that is something that can only be tested when the phone is open. You could remove the physical buttons place the battery back and then push with a pen or so on the switch to see if it works then.

If not, the cable has to be changed.

par

Ajouter un commentaire
Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 0

Total : 156