Aller au contenu principal

4ème génération de l'Apple iPhone. La réparation est relativement simple, mais la vitre avant et le LCD doivent être remplacés ensemble. GSM / capacité de 8, 16 ou 32 Go / Modèle A1332 / noir et blanc.

Questions au sujet de 2342 Voir tout
Question close

4 screen replacement troubleshooting--horizontal lines

i replaced the screen after meticulously following the directions. whenever press the home button, the screen is full of horizontal lines and I can faintly see the time display in the back. I have checked all of the ribbon cable connections and they seem good.

Any suggestions? Also, when I was attaching the back of phone, I could swear I saw the apple logo on the screen as clear as a bell.

Répondu ! Afficher la réponse J'ai le même problème

Cette question est-elle utile ?

Indice 0
Ajouter un commentaire

3 solutions

Solution retenue

Try reseating the LCD and touch flexes (under the shield held in place by the 5 screws towards the top centre of the motherboard)

Make sure you lift the battery connector first.

The lines relate to the connectors gold pins. Failing that it's a faulty screen or possible damage to the connectors. Good luck

Cette réponse est-elle utile ?

Indice 1
Ajouter un commentaire

Try cleaning the connectors bosh on PCB and spare part ribbons with a toothbrush. You can use highly concentrated alcohol or just do it dry, but stary gentle! Also, have you attached back the metal shield covering the lcd and digitizer ribbons connectors? It should keep connectors tight, and the being loose seems to be the cause of your problem.

In the worst scenario the ribbons are damaged somewhere, it May not be seen with bare eye however

Cette réponse est-elle utile ?

Indice 0
Ajouter un commentaire

Tried both options, but unfortunately neither one fixed the horizontal bars. Thanks for the suggestions!!

Cette réponse est-elle utile ?

Indice 0
Ajouter un commentaire
Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 0

Total : 75