Aller au contenu principal

Updated version of the original iPad 2, released in March of 2012 with a smaller die processor and updated internal construction. Repair will require the use of heat and careful prying.

73 questions Voir tout
Question close

Smart Cover Sensor Chip

Hi. I replaced the power/volume ribbon in my iPad2. The new ribbon I received has a black material covering the circuitry on the smart cover sensor of the ribbon, whereas the original one did not have anything covering it (see pics). I gently tried removing this black compound but it didn't feel like an adhesive or rubber, and I'm not quite sure how much force to put into it. The smart cover does not wake or put to sleep the iPad with this replacement and I'm thinking it has to do with that black compound....

Or is this a case of reversed polarity?

Thanks!

Block Image

Block Image

Répondu ! Afficher la réponse J'ai le même problème

Cette question est-elle utile ?

Indice 0
Ajouter un commentaire

1 Réponse

Solution retenue

The compound is just there to protect the components from damages from a drop or pry. You don't need to replace it. If the smart cover still doesn't work, then you probably have a defective part. Return it for an exchange.

Cette réponse est-elle utile ?

Indice 1

1 commentaire:

Thanks. I won't replace that ribbon just for that, it's a long and tedious replacement.

par

Ajouter un commentaire
Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 0

Total : 70