Aller au contenu principal

L'Apple iPhone 5s fut annoncé le 10 septembre 2013. La réparation de ce modèle est très similaire aux modèles précédents et requiert des tournevis ainsi que des outils pour faire levier. Disponible en version GSM ou CDMA, 16/32/64 Go de stockage et en argent, doré ou gris sidéral.

Questions au sujet de 3853 Voir tout

Blue screen of death

I've got an Iphone 5s from my friend and I used it for 20 days without any problems, One day at work wanted to call my wife and then the second I unlocked the screen my phone showed blue screen for 2 seconds and then went to apple logo. It wouldnt turn on for a while and then I started holding the home button and somehow I got it back,and at the moment I thought it was some kind of sudden problems and thought Its ok. but then same day in the evening it started doing it and it did 5 times and then turned off. And next day I wasn't able to use it at all because it was just keep rebooting with the blue screen. Then I got curious abt it and I took my tools and start digging it out. When I reach to board I noticed that phone had some kind of screen replacement or something. But one of those famous 4 screws was missing (top left),and the covering shield on the home button wire was also missing,wifi wire wasn't connected where it supposed to and the battery looked like it's been touched. So after all I got nervous and I did some fixing on my own after reading hundred of articles abt it ( like checking the screws if they were in the right spot,and put the wifi wire back) and of course not entirely but it seemed like I have done something good. So I've had my phone working for another 20 hours. I was just about to think that I've fixed it and then boom same story again. Lately its lasting longer than it used to before I put my hands in it but now I have a question. I have read many things on forums and stuff and everybody says it might be the "wrong screw trashing the logic board" thing.If it is,is it possible that I could use my phone like I described above? Or I have some other problem ? What do you guys think ?

Une réponse ! View the answer J'ai le même problème

Cette question est-elle utile ?

Score 0
Ajouter un commentaire

Fix Kits pour batterie de MacBook

À partir de $69.99

Buy Now

Fix Kits pour batterie de MacBook

À partir de $69.99

Buy Now

1 réponse

Solution retenue

Putting those screws in the wrong place is a very real thing to damage a phone. However, it doesn't sound like that, as those screws are missing. A blue screen and a boot logo are also a common thing for when display assembly is constantly messed with. You may need a new display assembly. It wouldn't hurt if you got the right screws and the shield that covers the display cables. The tricky part at this point though, is to get the right screws in the right spot. I have a micrometer. You might not. So you'll have to investigate which screws are which. Again, I believe you need a new display assembly.

iPhone 5s LCD and Digitizer

Image iPhone 5s LCD and Digitizer

Produit

iPhone 5s LCD and Digitizer

$39,99

Cette réponse est utile ?

Score 1

Commentaires:

First of all Thanks for your answer. The confusing thing is that I am able to turn it on,I am able to use it in general,but just doing that move when it wants,I have read many things and I have got it working better after I have removed two screws (down side, left and right),I have read somewhere that removing those two screws helps for some cases.So as I understood from your comment,I dont need to worry and consider to change logic board but instead I should focus on the display assembly right?

par

Yeah. It's probably just needing a new display assembly.

par

Ajouter un commentaire

Ajoutez une réponse

Emrah Arslan sera éternellement reconnaissant.
Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 0

Total : 149