Aller au contenu principal

L'Apple iPhone 5s fut annoncé le 10 septembre 2013. La réparation de ce modèle est très similaire aux modèles précédents et requiert des tournevis ainsi que des outils pour faire levier. Disponible en version GSM ou CDMA, 16/32/64 Go de stockage et en argent, doré ou gris sidéral.

3531 questions Voir tout
Question close

Guidance requested for installing Camera & Sensor Cable Shield Sticker

After my first "fail" in repairing an iPhone, I'm starting over, with new parts. In addition to a new front panel (I tore a cable on the "old" new front panel), I also ordered a new Camera and Sensor Cable Shield Sticker to replace the original one which looked pretty worn out after having been removed and replaced at least twice.

After reviewing assorted how-to guides, I've yet to find one which details how to go about replacing this part. I'm planning on just figuring it out as I go along, but I'd sincerely appreciate it if others would share their experience/advice. (I'm really hoping to avoid future problems with this project!)

Thanks in advance for sharing your knowledge.

Répondu ! Afficher la réponse J'ai le même problème

Cette question est-elle utile ?

Indice 0
1 commentaire

Thanks @WiN6MaN. After debating the risk of damaging the ribbon vs. the need for the sticker in the first place, I opted to stick (no pun intended) with the original Cu sticker. Hopefully I won't regret this decision.

par

Ajouter un commentaire

1 Réponse

Solution retenue

It sticks right behind the camera itself, you need to separate the camera and the ribbon a little. But be careful to not separate it to much or you'll break the ribbon.

Honestly tough this sticker is not crucial and even if it's not there the camera/light sensor will work just fine.

I think it serves as a ground to avoid or lessen screen static.

Cette réponse est-elle utile ?

Indice 0
Ajouter un commentaire
Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 0

Total : 34