Aller au contenu principal

4ème génération de l'Apple iPhone. La réparation est relativement simple, mais la vitre avant et le LCD doivent être remplacés ensemble. GSM / capacité de 8, 16 ou 32 Go / Modèle A1332 / noir et blanc.

2375 questions Voir tout
Question close

iPhone will not charge after taking apart. PLEASE HELP (read below)

I really need help.

I am going to replace the screen for my iphone 4. I got to step 13 (removing the EMI shield 2) when I decided to wait until the screen came (I was practicing and making sure I could understand it) I put it all back together and made sure all of the connections where together. The phone ran out of charge and now it WONT charge. I have checked the cable and the charging dock and all is ok. PLEASE HELP ME ASAP

Répondre à cette question J'ai le même problème

Cette question est-elle utile ?

Indice 0

1 commentaire:

anybody please help me

par

Ajouter un commentaire

2 Réponses

Reconnect the charging port (dock) flex cable very carefully, Step 9. It can be difficult to get just right. If still problem, take a very close look at the battery connector receptacle on the logic board. You probably lifted or damaged one or more of the battery logic board solder pads. Steps 5 and 8 for photos of battery connector socket.

Cette réponse est-elle utile ?

Indice 0

3 commentaires:

Hi brad,

The flex cable clicks when I put it back in, this is the same for the battery connector, is that meant to happen? If so the battery is still not charging..... Any other solutions???

par

please anyone help?^ read...

par

Anyone I really need to get this done. please read above and help.....

par

Ajouter un commentaire

Hi brad, The flex cable clicks when I put it back in, this is the same for the battery connector, is that meant to happen? If so the battery is still not charging..... Any other solutions???

Cette réponse est-elle utile ?

Indice 0
Ajouter un commentaire
Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 0

Total : 75