Aller au contenu principal

A budget companion phone for the Galaxy SIII, Also known as Samsung I8190 Galaxy S3 mini, Samsung Galaxy S III more. Available as Samsung I8190N Galaxy S III mini with NFC. Identifiable by the model number GT-i8190.

Questions au sujet de 50 Voir tout

Soldering a new USB port


My mom her Galaxy S3 (i8190) mini usb port broke (the little thing inside, just broke in half).

Now, I've did some soldering before but only with much larger objects.

Since this is very tiny, are there any things I should pay extra attention to?

Plus, since I don't have a desoldering station or equipment; What is the most easy way to remove the old one?

Very much thanks in advance!

PS. I apologize for my bad english..

Répondu ! Afficher la réponse J'ai le même problème

Cette question est-elle utile ?

Indice 0
Ajouter un commentaire

1 solution

Solution retenue

If u use hot air soldering station be carefful with microphone, put some tape onit to protect it.

U need to be carefull with pads, not to make short. Otherwise yout phone will not only be no charging but it wont work.

To replace USB connector properly u need microspoce, hot ait station and this soldering iron. Use flux!

To replace USB connect with only soldering iron put a lot of soldering on it and use max heat, then with tweezers remove usb connector, clean wholes and solder new one!

Cette réponse a-t-elle été utile ?

Indice 1


Thanks a lot man! :)


Ajouter un commentaire

Ajouter une réponse

Gilian sera éternellement reconnaissant.
Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 0

Total : 255