Aller au contenu principal

Réparez vos affaires

Droit à la réparation

Boutique

6ème génération de l'Apple iPhone, annoncé le 12 septembre 2012. La réparation de cet appareil est similaire aux précédents modèles et nécessite des tournevis et des outils pour ouvrir et faire levier. Disponible en GSM ou CDMA / 16, 32 ou 64Go / Noir ou Blanc.

Questions au sujet de 3403 Voir tout

Rear camera doesn't work even after replacement

Hi everyone

I have iPhone 5 that the rear camera doesn't work.

I have restore the phone to factory settings and replaced the rear camera and still no luck.

The camera is just black. Front camera working.

I disconnect the battery and connect it again.

Any more suggestions please help

Thanks

Répondu ! View the answer J'ai le même problème

Cette question est-elle utile ?

Indice 1

Commentaires:

I have the same issue with an iPhone 5s.

par

Did you try to factory reset the phone with iTunes?

par

Ajouter un commentaire

OUVRIR TOUS LES ONGLETS

Kits de mise à jour de RAM pour Mac

Voir les kits

Assez de RAM
pour ouvrir tous les onglets

Voir les kits

3 solutions

Solution retenue

For example it's not the first time that I see this component u13 fail. If you can measure the rear camera tension on the line before this component but not after it you can remove it and run a jumper to restore the tension that allows the rear camera to work. It could also be one of the many filters or capacitors that are on the rear camera connector lines, they are a lot. It's not easy to find the problem and it's also more difficult to fix it without a microscope and some experience in microsoldering.

Block Image

Cette réponse a-t-elle été utile ?

Indice 0

Commentaires:

thank you very much for the support.

par

you're welcome

par

Ajouter un commentaire

Take it to Apple ask them for a complete fresh install of iOS not just a restore

Cette réponse a-t-elle été utile ?

Indice 0

Commentaires:

Any other suggestions different than taking it to Apple?

par

Ajouter un commentaire

There are several component on the board that could have failed so there is not the right communication between the logic board and the rear camera. It is a microsoldering work, without the right equipment and skills you can't do anything more than that, I'm sorry. You could try another camera but it almost impossible that the two you have now are both faulty.

Cette réponse a-t-elle été utile ?

Indice 0

Commentaires:

Hi James can you send me example of the components that may fail? Thank you

par

Ajouter un commentaire

Ajouter une réponse

Mimi sera éternellement reconnaissant.
Afficher les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 0

Total : 138