Réparez vos affaires Communauté Boutique

Sorti le 19 septembre 2014, cet iPhone avec un écran de 4,7 pouces est une version plus petite de l'iPhone 6 Plus. Identifiables par les numéros de modèle A1549, A1586, et A1589.

4994 questions Voir tout
Question close

Options

The touch screen doesn't work!

Hi guys, i recently get an Iphone 6 that had been in the water, so I put all the motherboard in the IPA. A good new after that step was that the Iphone could open but I hadn't any touch at all on the screen. I changed all the screen with a new one to check if the last one was done but it didn't change anything.....same problem. Can you help me with that? What will you do? Do you think that the ribbon (for the touch) on the motherboard is done?

Répondu ! Afficher la réponse J'ai le même problème

Cette question est-elle utile ?

Oui Non
Indice 0
Ajouter un commentaire

2 Réponses

Filtrer par :
Les plus utiles Les plus récentes Les plus ancien(ne)s
Solution retenue

Options

Check the connection on the logic board for burn marks or areas of corrosion. The issue will likely be found near the connector . Did you use a ultrasonic bath or just soak in isopropal alcohol?. You can also try using flux on the connector and hitting it with a hot air blast from a heat station . this can clean up the connection and reflow solder that corrosion could have caused damage too . Hope this helps

Cette réponse est-elle utile ?

Oui Non
Indice 1

1 commentaire:

Thanks a lot! I will try!

par

Ajouter un commentaire

Options

The issue could be the touch IC. Not necessarily, but check out this link. It has some cool information if nothing else.

Cette réponse est-elle utile ?

Oui Non
Indice 0
Ajouter un commentaire
Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 3

30 derniers jours : 3

Total : 385