Aller au contenu principal

Printers Manufactured by the Zebra Technologies Corporation

11 questions Voir tout

Why does 2 blank labels come out on start up?

When I turn my ZP-450 on, it spits out 2 blank labels. How do I stop it from wasting labels like this?

Thanks,

Bob

Répondre à cette question J'ai le même problème

Cette question est-elle utile ?

Indice 0
Ajouter un commentaire

1 Réponse

Hi Bob, that is a normal self calibration when you first turn your printer on. The easiest way to void that is to never turn your printer off. All modern electronics are designed to be left on all the time. They go to sleep mode when not in use and use very little electricity. When you need it the printer will be needed. We have a similar printer that we use six days a week. We never turn it off. There is a way to stop the self calibration but I do not recommend it. It is too technical and you might need it in the future.

I hope this helps.

Cette réponse est-elle utile ?

Indice 0
Ajouter un commentaire

Ajouter une réponse

R Johns sera éternellement reconnaissant.
Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 1

Total : 203