Aller au contenu principal

Version revisitée de l'iPhone 3G avec une vitesse de traitement plus élevée. La réparation de ce modèle est similaire à celle du 3G et nécessite de simples tournevis et outils pour faire levier. Modèle A1303 / capacité de 16 ou 32 Go / coque en plastique noir ou blanc.

1500 questions Voir tout

How to remove adhesive glue?

Hi everyone,

I'm replacing the glass of my iPhone 3GS because it was cracked. I have separated the glass from the bracket with a heat gun. But how do I remove the glue residue that is left behind?

Thanks,

naf

Répondu ! Afficher la réponse J'ai le même problème

Cette question est-elle utile ?

Indice 0
Ajouter un commentaire

2 Réponses

Solution retenue

I use isopropyalcohol as it's not likely to cause liquid damage to any parts and either a small flat head screw driver or plastic spudger tool to scrape it off. it's fiddly and annoying but you can also just use your fingers to roll it and pull it off.

Cette réponse est-elle utile ?

Indice 1
Ajouter un commentaire
Réponse la plus utile

With a q-tip, try using a bit of Goo Gone or Goo Off. A small amount goes along way. After you've removed the residue, use another q-tip with ALCOHOL to remove any oils left behind by the Goo Gone/Goo Off. That's what I do for all my electronics.

Cette réponse est-elle utile ?

Indice 2

2 commentaires:

+ for the goo gone

par

Goof off and goo gone are NOT suitable for plastics. It will damage it

par

Ajouter un commentaire

Ajouter une réponse

naf sera éternellement reconnaissant.
Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 2

30 derniers jours : 12

Total : 5,674