Rep: 13
2
Hello
My n3DS XL got broken connector from ABXY board to main board. I want to replace it but I don't know where to buy. Does anyone here know where to buy it ?
I include the exact broken connector (mark with red circle)
Thanks for any help.
Cette question est-elle utile ?
Rep: 1,1k
7
5
1
Take it from me, I've tried replacing these ports on a couple other 3DS XL PCBs. It's almost impossible without a heating table, similar to the work you'd do to reball a PS3, PS4, Xbox 1 or Xbox 360. The pins are too tiny and almost impossible to heat back up properly.
My suggestion is to just buy a new board. If this is a project or you're attempting to fix and sell back on eBay then "scrap" it for parts.
If you want to experiment and you have a heat gun, you could try heating the part off the board to see if that works. You'd also need some kapton tape to protect other devices on the board while this particular port is removed. If you don't want to damage this board, then look for a cheap "for parts" PCB off eBay that you can practice with in order to heat it up and remove the part.
Good luck if you attempt to fix it. I'd highly recommend replacing the board entirely though.
Cette réponse est-elle utile ?
Digi Key or Mouser
Search for JAE FA1004SA1-R8000
Edit: Oops. Never mind. I thought you were talking about the little 4-pin one before I saw the picture.
Cette réponse est-elle utile ?
Dernières 24 heures : 0
7 derniers jours : 2
30 derniers jours : 8
Total : 589
