Réparez vos affaires Communauté Boutique

Sorti le 19 septembre 2014, cet iPhone avec un écran de 5,5" est une version plus large de l'iPhone 6.

1525 questions Voir tout

Options

Screen doesn't work after replacing volume flex cable

Hey,

I had to replace the volume flex cable, after that I check my phone if it works and connected the battery and powered it on. Works, good. Then I disconnected the battery to put the screws for the screen protection plate (the thing that protects the screen connectors on the logic board), reconnected the battery an now it doesn't show anything. I connected the phone to my computer and iTunes says it found a phone in recovery mode and I have to restore it to use it with iTunes. If I try to restore it im getting the 4014 error.

I tried to check the battery with a LED and the LED lighted up so I dunno what happened to my phone. I also ordered a new battery but it will take 4 days .

may someone could help me what i could do in the mine while, what i could check or something.

Sorry for the bad English .

Répondre à cette question J'ai le même problème

Cette question est-elle utile ?

Oui Non
Indice 0
Ajouter un commentaire

2 Réponses

Filtrer par :
Les plus utiles Les plus récentes Les plus ancien(ne)s

Options

Try rebooting the phone by holding power and home. After doing this, does anything show up? The recovery symbol or a red or blue screen?

Cette réponse est-elle utile ?

Oui Non
Indice 0

3 commentaires:

nothing, blackscreen and iTunes recognize it in recovery mode

par

OK. I was trying to rule out long screw damage which is what the poster below me was getting at. You did put the longer screw in the upper right spot?

If its not long screw damage, it could be as simple as a bad screen. Another possibility is a torn LCD flex cable or a damaged LCD connector on the logic board. I would examine those to see if you find any damage and possibly try a known working display.

One other thing: disconnect your battery, plug the display into the logic board, then reconnect the battery. Plug it into power and watch very closely to see if you see the apple but its very dim. Some people use a flashlight to help. Its possible that the display is working and that its just very dim, which would be a backlight filter blew.

par

yes, longer screw in upper right,

i dont really know how long screw damage looks like so i tried to take some photos closed I can: http://imgur.com/a/rb0xY

New battery didnt solved it, ordered a new display now and will try at saturday ..

par

Ajouter un commentaire

Options

Are all 5 screws that hold the metal plate over the connectors from LCD to board/pcb in the right position?

disconnect battery, remove all screws and the plate..hold down power button for about 10-15 sec.

disconnect an reseat the lcd flex cables and connect battery..try to power on without screws and plate..even try rebbot as Josh W said..

Cette réponse est-elle utile ?

Oui Non
Indice 0

2 commentaires:

yea, I checked it 3 times, also tried reconnect cables etc ..

I hope the new battery arrives tomorrow and its fixed then .,

par

what happens if you disconnect the new volume flex?

par

Ajouter un commentaire

Ajouter une réponse

NiL sera éternellement reconnaissant.
Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 0

Total : 81