RÉSOLU : water damage, no sound, very slow, fan keep spinning in high speed - MacBook Air 13" Mid 2012

water damage, no sound, very slow, fan keep spinning in high speed

MacBook Air 13" Mid 2012

Spilled some water on it, then some keys stopped working, so I replaced the keyboard, the new keyboard works fine, however after the replacement; there is no sound at all (not even the boot up chime) , and it becomes very slow , even just moving the mouse lags; and the fan is always spinning at high speed;

The WIFI also malfunctioned after replacement for some time (no hardware installed), but somehow it is working again.

I tried to reset SMC, doesn't work, the LED on the magnet connector doesn't even light up.

which part might be wrong in such case? logic board or I/O board?

Répondu ! Afficher la réponse J'ai le même problème

Cette question est-elle utile ?

Oui Non

Indice 0

Publié: 10 oct. 2016

Options

Personally I would run both the board and the I/O board through my ultrasonic cleaner. There's probably still gunk/corrosion causing these issues.

If the board or I/O board have been damaged, an ultrasonic cleaning won't help, but the first step is to remove the gunk and verify that's not the problem.

Cette réponse est-elle utile ?

Oui Non

Indice 1

4 commentaires:

John, very long time, no see ;-)

11 oct. 2016 par mayer

Thanks for your answer, however I don't have a ultrasonic cleaner, and from the visual inspect, the boards do not seem to be dirty

11 oct. 2016 par Jun Hu

Hi @mayer ! Good to see you and hope you're doing well!

11 oct. 2016 par rdklinc

Concerning the board, have you inspected the other side? If the liquid came through the keyboard, corrosion could easily be on the other side. Even then, it's not necessarily visible -- part of the benefit of an ultrasonic cleaner is that they clean UNDER the chips.

11 oct. 2016 par rdklinc

Ajouter un commentaire

MacBook Air 13" mi-2012

water damage, no sound, very slow, fan keep spinning in high speed

1 Réponse

Ajouter une réponse